Error building libsmm

[Abhishek Bagusetty]

Hi Alfio,

I have looked into the *.out files generated by the tiny1. I didn't see 9 
columns in the *.out but instead 6 columns.

   1   1   1   1    0.441932       2.263
   1   1   1   7    0.242963       4.116
   1   1  17   1    0.370944       2.696
   1   3   1   1    0.249962       4.001
   1   3   1   7    0.544917       1.835
   1   5   1   1    0.267959       3.732
   1  15   1   1    0.498925       2.004
   2   1   1   1    0.441932       2.263

This is the output from a file (tiny_find_xx_xx_xx.out) in 
/build_libsmm/run_tiny_dnn/output_linux.intel/
I have modified the pbs.wlm file by getting rid of few options like 
-lmppwidth and -lmppnppn which were not defined in the PBS for our cluster. 
I am not sure how to investigate further. Do you have any pointers on how 
to approach this ?

Thank for your time. 

Abhishek 

On Monday, October 20, 2014 12:41:23 AM UTC-4, Alfio Lazzaro wrote:
>
> Hello Abhishek,
> could you check if the tiny2 phase is properly producing the tiny file? I 
> mean, the error you are seeing is that the system is not able to read the 
> tiny results during the small1 phase.
> The file should be something similar to:
>
> 1 1 1    1   1   1   1    0.447362       0.447
> 1 1 2    4   1   1   1    0.451188       0.887
> 1 1 3    3   1   1   1    0.484057       1.240
> 1 1 4    5   1   1   4    0.500210       1.599
> 1 1 5    6   1   1   5    0.548113       1.824
> 1 1 6    1   1   1   6    0.456724       2.190
>
> As you can see there are 9 columns. If you see only 3 (the first three 
> ones) then there is something wrong during tiny1.
> The next step would be to investigate if the files *.out inside the tiny1 
> directory and then output directory are correct (you can post an example of 
> .out file).
>
> Best regards,
>
> Alfio
>
>
>
>
> Il giorno domenica 19 ottobre 2014 22:03:42 UTC+2, Abhishek Bagusetty ha 
> scritto:
>>
>> Hi Users & Developers,
>>
>> I am trying to build libsmm small matrix multiplication library and got 
>> an error while doing the 3rd step.
>>
>> Steps : 
>> 1. ./generate -c config/linux.intel -j 100 -t 16 -w pbs tiny1
>> 2. ./generate -c config/linux.intel tiny2
>> 3. ./generate -c config/linux.intel -j 20 -t 16 -w pbs small1
>>
>>
>> multrec_gen.f90:267.29:
>>
>>      IF (ANY(best_square<1)) ERROR STOP "tiny opts file needs 
>> sufficiently many
>>
>>                              1
>>
>> Error: Cannot assign to a named constant at (1)
>>
>> multrec_gen.f90:331.7:
>>
>>        ERROR STOP "MISSING CASE mult_versions"
>>
>>        1
>> Error: Unclassifiable statement at (1)
>>
>>
>> It would be great, if anyone has any pointers to get a fix on this issue. 
>> Thanks,
>>
>> Abhishek
>> ------------------------------------------------------------
>> -----------------------------------------------
>> Abhishek Bagusetty
>> PhD Student, Computational Modeling & Simulation
>> Center for Simulation and Modeling
>> Department of Chemical & Petroleum Engineering
>> University of Pittsburgh
>> Pittsburgh, PA - 15261
>> Office : 920 Benedum Hall
>>
>> -----------------------------------------------------------------------------------------------------------
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cp2k.org/archives/cp2k-user/attachments/20141020/3018237c/attachment.htm>