<div dir="ltr"><div>Hello everyone,</div><div><br></div><div>When optimizing with CP2K, we set a force limit and a maximum step size (for example less than 10meV and 0.002Bohr) and when the calculations reached those limits it is done. Before using CP2K I used Gaussian 09. When the geometry optimization was fully performed, I performed frequency calculation in order to check that there is no imaginary frequency so the optimization is not stuck in the local minima. However, when it came to big molecules, the rwf file tended to be hundreds of GB, so the calculations was not possible. Now, my question is:</div><div><br></div><div><br></div><div>Is it necessary to perform frequency calculations (like phonon calculations using phonopy) for the optimized geometry in CP2K? I mean the BFGS algorithm for geometry optimization is guaranteed to not stuck in the local minima? For example my system contains a quantum dot with many organic ligands (near 300 atoms) and the optimization is fully performed but I don't know if it would be acceptable to allege that this is the optimum geometry!  To sum up: when can we say that this is optimum geometry for this specific geometry configuration?</div><div><br></div><div>Thanks in advance. <br></div></div>