[CP2K-user] [CP2K:19543] Re: Significant discontinuity in EOS curver for FeO

Kejiang Li lyam_likej at 126.com
Wed Nov 22 00:31:38 UTC 2023


Dear Prof. Hutter,

Thanks for your reply.

The setup for QE is significantly tested in our 
paper: https://www.mdpi.com/1996-1944/15/23/8316/htm

As shown in the attached table.

Best regards,
Kejiang


[image: WX20231122-083008 at 2x.png]

On Tuesday, November 21, 2023 at 4:46:31 PM UTC+8 Jürg Hutter wrote:

> Hi
>
> what is the setup for the QE calculation (cell, k-points, magnetization)?
>
> regards
> JH
>
> ________________________________________
> From: cp... at googlegroups.com <cp... at googlegroups.com> on behalf of 
> Kejiang Li <lyam_... at 126.com>
> Sent: Monday, November 20, 2023 2:26 AM
> To: cp2k
> Subject: [CP2K:19531] Re: Significant discontinuity in EOS curver for FeO
>
> Dear all,
>
> To add one more point.
> As it was said, using a reference cell might solve this problem (
> https://groups.google.com/g/cp2k/c/N52jLt2yAIQ/m/JAlV3KTVUtIJ). You will 
> notice that I used &CELL_REF in my input script, which did not solve my 
> problem.
>
> Thanks.
> Kejiang
>
> On Monday, November 20, 2023 at 9:00:11 AM UTC+8 Kejiang Li wrote:
> Dear CP2K community,
>
> I am calculating the EOS for FeO with a 2*2*2 supercell. But there is 
> always a significant discontinuity (sharp decrease) in the range of 4.3-4.4 
> angstrom lattice constant in the EOS curves, as shown in the figures below.
>
> I have done the following tests:
> - the convergence of the energy with different cutoffs;
> - using different functionals, including PBE, HSE, and SCAN;
> -including HSE with different HF fractions;
> -using different magnetization and +U settings.
> However, all the tests produce similar results with an apparent 
> discontinuity (4.3-4.3 A) .
>
> This discontinuity is not observed in the Quantum Espresso results 
> conducted by myself and in the results of literature that generally used 
> VASP. I believe that the CP2K program might cause this problem.
>
> Can you give me more suggestions on how to do further tests?
>
> Here, I also attached one sample code I used during my tests.
>
> Thanks a lot.
>
> Best regards,
> Kejiang
> The University of Science and Technology Beijing
>
> [cp2k_functionals.jpg]
> [cp2k_mag_u.jpg][cp2k_mag_u2.jpg]
>
> --
> You received this message because you are subscribed to the Google Groups 
> "cp2k" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to cp2k+uns... at googlegroups.com<mailto:cp2k+uns... at googlegroups.com
> >.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/cp2k/f6ca6f04-88e1-47cf-aa9f-342a276d7776n%40googlegroups.com
> <
> https://groups.google.com/d/msgid/cp2k/f6ca6f04-88e1-47cf-aa9f-342a276d7776n%40googlegroups.com?utm_medium=email&utm_source=footer
> >.
>

-- 
You received this message because you are subscribed to the Google Groups "cp2k" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cp2k+unsubscribe at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/cp2k/c1516518-0402-4e3d-a0c4-2dbf52ea3859n%40googlegroups.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.cp2k.org/archives/cp2k-user/attachments/20231121/047b4f00/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WX20231122-083008 at 2x.png
Type: image/png
Size: 147928 bytes
Desc: not available
URL: <https://lists.cp2k.org/archives/cp2k-user/attachments/20231121/047b4f00/attachment-0001.png>


More information about the CP2K-user mailing list