[CP2K-user] [CP2K:17760] Re: Crystal optimization with periodic boundary conditions
Jürg Hutter
hutter at chem.uzh.ch
Tue Sep 27 09:21:21 UTC 2022
Hi
the first task is to get the wavefunction converged. Have a look into the &SCF section
that has been proposed for similar systems on this mailing list.
You should also change STRESS_TENSOR NUMERICAL
to STRESS_TENSOR ANALYTICAL in order to save CPU time.
regards
JH
________________________________________
From: cp2k at googlegroups.com <cp2k at googlegroups.com> on behalf of Victor Nazarychev <nazarychev at gmail.com>
Sent: Monday, September 26, 2022 5:28 PM
To: cp2k at googlegroups.com
Subject: Re: [CP2K:17757] Re: Crystal optimization with periodic boundary conditions
Dear Prof. Jürg Hutter,
Thank you very much for your response. I changed the basis sets for the atom types, and the simulation started.
However, the energy significantly increases during the first step of the scf field calculation.
SCF WAVEFUNCTION OPTIMIZATION
Step Update method Time Convergence Total energy Change
------------------------------------------------------------------------------
1 P_Mix/Diag. 0.40E+00 34.1 1.49352991 -3306.5025219983 -3.31E+03
2 P_Mix/Diag. 0.40E+00 52.5 0.97283893 -3337.7996220399 -3.13E+01
3 P_Mix/Diag. 0.40E+00 51.8 0.88366630 -3355.9794833839 -1.82E+01
4 P_Mix/Diag. 0.40E+00 52.4 1.49440081 -3366.3903106073 -1.04E+01
5 P_Mix/Diag. 0.40E+00 52.3 4.78093105 -3357.3113062081 9.08E+00
6 P_Mix/Diag. 0.40E+00 55.6 5.13204666 8949.0258399209 1.23E+04
7 P_Mix/Diag. 0.40E+00 55.7 4.87209898 1382.2558657457 -7.57E+03
8 P_Mix/Diag. 0.40E+00 52.1 4.11402739 5878.6202919895 4.50E+03
9 P_Mix/Diag. 0.40E+00 52.1 3.90597954 3458.6520635220 -2.42E+03
10 P_Mix/Diag. 0.40E+00 52.1 4.44874753 5101.5066833448 1.64E+03
11 P_Mix/Diag. 0.40E+00 52.4 4.40856697 4378.1126110753 -7.23E+02
12 P_Mix/Diag. 0.40E+00 52.1 4.62106313 4808.7707611559 4.31E+02
13 P_Mix/Diag. 0.40E+00 52.3 4.69047378 4716.1178362235 -9.27E+01
Below is my input file.
Could you expect that it is due to the standard PW cut-off or "small" basis set?
Best wishes,
Victor
####################################################################
&GLOBAL
PROJECT crys_pbc
RUN_TYPE GEO_OPT ! ENERGY
PRINT_LEVEL MEDIUM
EXTENDED_FFT_LENGTHS .TRUE.
&END GLOBAL
&MOTION
&GEO_OPT
TYPE MINIMIZATION
MAX_DR 1.0E-03
MAX_FORCE 1.0E-03
RMS_DR 1.0E-03
RMS_FORCE 1.0E-03
MAX_ITER 200
OPTIMIZER CG
&CG
MAX_STEEP_STEPS 0
RESTART_LIMIT 9.0E-01
&END CG
! KEEP_SYMMETRY .TRUE.
! OPTIMIZER CG !LBFGS
&END
&PRINT
&TRAJECTORY LOW
ADD_LAST NUMERIC
LOG_PRINT_KEY T
FORMAT XMOL
&EACH
GEO_OPT 1
&END EACH
&END TRAJECTORY
&RESTART LOW
ADD_LAST NUMERIC
LOG_PRINT_KEY T
&EACH
GEO_OPT 1
&END EACH
&END RESTART
&END PRINT
&END MOTION
&FORCE_EVAL
METHOD Quickstep ! Electronic structure method (DFT,...)
STRESS_TENSOR NUMERICAL
&DFT
BASIS_SET_FILE_NAME BASIS_MOLOPT
POTENTIAL_FILE_NAME POTENTIAL
&POISSON ! Solver requested for non periodic calculations
PERIODIC XYZ
&END POISSON
&SCF ! Parameters controlling the convergence of the scf. This section should not be changed.
SCF_GUESS ATOMIC
EPS_SCF 1.0E-6
MAX_SCF 60
&PRINT
&RESTART SILENT
ADD_LAST NUMERIC
COMMON_ITERATION_LEVELS 1
FILENAME =./WFN_restart.wfn
LOG_PRINT_KEY T
&EACH
&END EACH
&END RESTART
&END PRINT
&END SCF
&XC ! Parameters needed to compute the electronic exchange potential
&XC_FUNCTIONAL PBE
&END XC_FUNCTIONAL
&END XC
&END DFT
&SUBSYS
&CELL
CELL_FILE_FORMAT CIF
ABC 4.6284 140.3208 9.4837
SYMMETRY MONOCLINIC
PERIODIC XYZ
MULTIPLE_UNIT_CELL 3 1 3
&END CELL
&TOPOLOGY ! Section used to center the atomic coordinates in the given box. Useful for big molecules
COORD_FILE_FORMAT cif
COORD_FILE_NAME ./cell.cif
! &CENTER_COORDINATES
! CENTER_POINT 5. 5. 5.
! &END
&END
&KIND H
ELEMENT H
BASIS_SET SZV-MOLOPT-GTH
POTENTIAL GTH-PBE-q1
&END KIND
&KIND O
ELEMENT O
BASIS_SET SZV-MOLOPT-GTH
POTENTIAL GTH-PBE-q6
&END KIND
&KIND C
ELEMENT C
BASIS_SET SZV-MOLOPT-GTH
POTENTIAL GTH-PBE-q4
&END KIND
&KIND N
ELEMENT N
BASIS_SET SZV-MOLOPT-GTH
POTENTIAL GTH-PBE-q5
&END KIND
&END SUBSYS
&END FORCE_EVAL
####################################################################
пт, 9 сент. 2022 г. в 18:44, Jürg Hutter <hutter at chem.uzh.ch<mailto:hutter at chem.uzh.ch>>:
Hi
probably there is not enough memory? You can try a smaller basis set and a lower
PW cutoff to see if it runs through.
Another possibility is to monitor your memory usage during the run.
regards
JH
________________________________________
From: cp2k at googlegroups.com<mailto:cp2k at googlegroups.com> <cp2k at googlegroups.com<mailto:cp2k at googlegroups.com>> on behalf of Victor Nazarychev <nazarychev at gmail.com<mailto:nazarychev at gmail.com>>
Sent: Friday, September 9, 2022 8:55 AM
To: cp2k
Subject: [CP2K:17639] Re: Crystal optimization with periodic boundary conditions
Dear users and developers of CP2K,
I tried starting the simulation of the crystal structure using cp2k. To do that, I used an input file:
&GLOBAL
PROJECT crys_pbc_opt
RUN_TYPE GEO_OPT
PRINT_LEVEL MEDIUM
EXTENDED_FFT_LENGTHS .TRUE.
&END GLOBAL
&MOTION
&GEO_OPT
! KEEP_SPACE_GROUP .TRUE.
OPTIMIZER LBFGS
&END GEO_OPT
&END MOTION
&FORCE_EVAL
METHOD Quickstep ! Electronic structure method (DFT,...)
&DFT
BASIS_SET_FILE_NAME BASIS_MOLOPT
POTENTIAL_FILE_NAME POTENTIAL
&POISSON ! Solver requested for non periodic calculations
PERIODIC XYZ
&END POISSON
&SCF ! Parameters controlling the convergence of the scf. This section should not be changed.
SCF_GUESS ATOMIC
EPS_SCF 1.0E-6
MAX_SCF 300
&END SCF
&XC ! Parameters needed to compute the electronic exchange potential
&XC_FUNCTIONAL PBE
&END XC_FUNCTIONAL
&END XC
&END DFT
&SUBSYS
&CELL
CELL_FILE_FORMAT CIF
ABC 9.2568 140.3208 18.9674
PERIODIC XYZ
&END CELL
&TOPOLOGY ! Section used to center the atomic coordinates in the given box. Useful for big molecules
COORD_FILE_FORMAT cif
COORD_FILE_NAME ./cell.cif
! &CENTER_COORDINATES
! CENTER_POINT 5. 5. 5.
! &END
&END
&KIND H
ELEMENT H
BASIS_SET DZVP-MOLOPT-GTH
POTENTIAL GTH-PBE-q1
&END KIND
&KIND O
ELEMENT O
BASIS_SET DZVP-MOLOPT-GTH
POTENTIAL GTH-PBE-q6
&END KIND
&KIND C
ELEMENT C
BASIS_SET DZVP-MOLOPT-GTH
POTENTIAL GTH-PBE-q4
&END KIND
&KIND N
ELEMENT N
BASIS_SET DZVP-MOLOPT-GTH
POTENTIAL GTH-PBE-q5
&END KIND
&END SUBSYS
&END FORCE_EVAL
##############################################
The simulation starts, but only one step of SCF wavefunction optimization is passed, and then the calculation stops without errors.
Re-scaling the density matrix to get the right number of electrons
# Electrons Trace(P) Scaling factor
8576 8575.456 1.000
SCF WAVEFUNCTION OPTIMIZATION
Step Update method Time Convergence Total energy Change
------------------------------------------------------------------------------
1 P_Mix/Diag. 0.40E+00 ****** 1.37713667 -13502.7304100109 -1.35E+04
How do you think, what happens? How could I change the input file to solve this problem?
Best regards,
Victor
суббота, 20 августа 2022 г. в 17:41:05 UTC+3, Victor Nazarychev:
Dear users and developers of CP2K,
I am a new user of CP2K. I want to use CP2K to simulate the DFT of a polymer crystal, which contains ~2500 atoms (C, N, O, H). This initial crystal conformation was suggested by the experimenters, and I need to optimize this structure to find the minimal energy state.
I'm considering using CP2K due to its ability to do periodic DFT calculations. My question is related to what DFT functional and basis sets can be used to optimize a periodic crystal structure if such a massive system is considered? Maybe some there exists some examples of an input file for the problem of optimizing crystal systems using periodic boundary conditions?
For these calculations, I have a workstation with an AMD Ryzen 5950x and 64 GB of memory. Also, is it possible to speed up the calculation with the GPU?
Best wishes,
Victor
--
You received this message because you are subscribed to the Google Groups "cp2k" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cp2k+unsubscribe at googlegroups.com<mailto:cp2k%2Bunsubscribe at googlegroups.com><mailto:cp2k+unsubscribe at googlegroups.com<mailto:cp2k%2Bunsubscribe at googlegroups.com>>.
To view this discussion on the web visit https://groups.google.com/d/msgid/cp2k/a2a11a0e-43d2-4110-986d-4598dc1b0f3dn%40googlegroups.com<https://groups.google.com/d/msgid/cp2k/a2a11a0e-43d2-4110-986d-4598dc1b0f3dn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to a topic in the Google Groups "cp2k" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/cp2k/N_cusnCv_B4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to cp2k+unsubscribe at googlegroups.com<mailto:cp2k%2Bunsubscribe at googlegroups.com>.
To view this discussion on the web visit https://groups.google.com/d/msgid/cp2k/ZR0P278MB0759063BF93FD6DC95CA1ABB9F439%40ZR0P278MB0759.CHEP278.PROD.OUTLOOK.COM.
--
You received this message because you are subscribed to the Google Groups "cp2k" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cp2k+unsubscribe at googlegroups.com<mailto:cp2k+unsubscribe at googlegroups.com>.
To view this discussion on the web visit https://groups.google.com/d/msgid/cp2k/CALpHq2czwj5CtAX%2BKNx8ex89EqRMow_r1PRmrk1qAGE%3DoT_zMg%40mail.gmail.com<https://groups.google.com/d/msgid/cp2k/CALpHq2czwj5CtAX%2BKNx8ex89EqRMow_r1PRmrk1qAGE%3DoT_zMg%40mail.gmail.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups "cp2k" group.
To unsubscribe from this group and stop receiving emails from it, send an email to cp2k+unsubscribe at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/cp2k/ZR0P278MB0759B103E5AEE8A36F91B0219F559%40ZR0P278MB0759.CHEP278.PROD.OUTLOOK.COM.
More information about the CP2K-user
mailing list