[CP2K:6898] Why the trajecoty of na atom is fixed ?

hut... at chem.uzh.ch hut... at chem.uzh.ch
Wed Aug 12 08:30:03 UTC 2015


Hi

if you are using GAPW you most likely can keep the Cutoff rather
low (about 200-300), but in any case I would set the REL_CUTOFF
to a value of 50-60.
If possible I would also not use the smoothing with GAPW.

regards

Juerg 
--------------------------------------------------------------
Juerg Hutter                         Phone : ++41 44 635 4491
Institut für Chemie C                FAX   : ++41 44 635 6838
Universität Zürich                   E-mail: hut... at chem.uzh.ch
Winterthurerstrasse 190
CH-8057 Zürich, Switzerland
---------------------------------------------------------------

-----cp... at googlegroups.com wrote: -----To: cp2k <cp... at googlegroups.com>
From: jia 
Sent by: cp... at googlegroups.com
Date: 08/12/2015 10:17AM
Subject: Re: [CP2K:6898] Why the trajecoty of na atom is fixed ?

Prof. Hutter,Thanks for your reply! I have considered your suggestion of CUTOFF, functional and GAPW and smoothen.
Now the reatart file is like this:



The result is as follows.
(1) If we only increase CUTOFF,  or  or change the functional from BLYP to PBE, the Na atoms are still fixed.(2) With the GAPW, the Na atoms moves.(3)  And for the test we increase CUTOFF, change the functional to PBE, use GAPW and XC_SMOOTH_RHO, the Na atoms moves. The trajectory for 0.36 ps is shown here.
So the main reason is I did not use GAPW before.PS: --Because this is a test model,  I still kept the long range correction. For the NLCC pseudopotentials, after reading  Alex Willand et al  's paper (2013), Norm-conserving pseudopotentials with chemical accuracy compared to all-electron calculations. I also did not use the NLCC pseudopotentials. (http://scitation.aip.org/content/aip/journal/jcp/138/10/10.1063/1.4793260) 
--Now the input (restart file) is as follows.
        
        
        


&GLOBAL
   PRINT_LEVEL  MEDIUM
   PROJECT_NAME 2w_2Na 
   RUN_TYPE  MD
 &END GLOBAL
 &MOTION
   &GEO_OPT
     TYPE  MINIMIZATION
     OPTIMIZER  BFGS
     MAX_ITER  20
   &END GEO_OPT
   &MD
     ENSEMBLE  NVT
     STEPS  1000
     TIMESTEP     4.9999999999999989E-01
     STEP_START_VAL  1584
     TIME_START_VAL     7.9200000000000932E+02
     ECONS_START_VAL    -2.2970419127064038E+03
     TEMPERATURE     3.3000000000000006E+02
     TEMP_TOL     8.0000000000000000E+01
     &THERMOSTAT
       &NOSE
         LENGTH  3
         YOSHIDA  3
         TIMECON     9.9999999999999955E+02
         MTS  2
         &COORD
               4.6804334715900502E-02    6.4063067951588215E-01   -1.7671728013981677E-01
         &END COORD
         &VELOCITY
               1.0848945164897635E-06    4.3154851784712554E-05    1.1317451952244691E-06
         &END VELOCITY
         &MASS
               1.5271179928232741E+09    1.7861029155827765E+06    1.7861029155827765E+06
         &END MASS
         &FORCE
              -1.1179502436284231E-12    4.2123153718162141E-10    1.2772410940594576E-09
         &END FORCE
       &END NOSE
     &END THERMOSTAT
     &AVERAGES  T
       &RESTART_AVERAGES
         ITIMES_START  1
         AVECPU     8.3660323358309768E+01
         AVEHUGONIOT     0.0000000000000000E+00
         AVETEMP_BARO     0.0000000000000000E+00
         AVEPOT    -1.2952630029344064E+03
         AVEKIN     2.7106480019472567E-01
         AVETEMP     3.5561567432356406E+02
         AVEKIN_QM     0.0000000000000000E+00
         AVETEMP_QM     0.0000000000000000E+00
         AVEVOL     5.1174547637613250E+04
         AVECELL_A     5.8581510119454805E+01
         AVECELL_B     2.9556072608784607E+01
         AVECELL_C     2.9556072608784607E+01
         AVEALPHA     9.0000000000000043E+01
         AVEBETA     9.0000000000000043E+01
         AVEGAMMA     9.0000000000000043E+01
         AVE_ECONS     3.9657707679004423E+07
         AVE_PRESS     0.0000000000000000E+00
         AVE_PXX     0.0000000000000000E+00
       &END RESTART_AVERAGES
     &END AVERAGES
   &END MD
   &PRINT
     &TRAJECTORY  SILENT
       &EACH
         MD  1
       &END EACH
     &END TRAJECTORY
     &VELOCITIES  ON
       &EACH
         MD  1
       &END EACH
     &END VELOCITIES
     &FORCES  ON
       &EACH
         MD  1
       &END EACH
     &END FORCES
     &RESTART  SILENT
       BACKUP_COPIES  1
       &EACH
         MD  1
       &END EACH
     &END RESTART
     &RESTART_HISTORY  SILENT
       &EACH
         MD  1000
       &END EACH
     &END RESTART_HISTORY
   &END PRINT
 &END MOTION
 &FORCE_EVAL
   METHOD  QS
   &DFT
     BASIS_SET_FILE_NAME ../BASIS_MOLOPT
     POTENTIAL_FILE_NAME ../GTH_POTENTIALS
     &SCF
       MAX_SCF  300
       EPS_SCF     4.9999999999999998E-07
       SCF_GUESS  RESTART
       &OT  T
       &END OT
     &END SCF
     &QS
       EPS_DEFAULT     9.9999999999999998E-13
       EXTRAPOLATION  PS
       EXTRAPOLATION_ORDER  3
       METHOD  GAPW
     &END QS
     &MGRID
       CUTOFF     9.0000000000000000E+02
     &END MGRID
     &XC
       DENSITY_CUTOFF     1.0000000000000000E-10
       GRADIENT_CUTOFF     1.0000000000000000E-10
       TAU_CUTOFF     1.0000000000000000E-10
       &XC_GRID
         XC_SMOOTH_RHO  SPLINE3
       &END XC_GRID
       &XC_FUNCTIONAL  NO_SHORTCUT
         &BECKE88  T
         &END BECKE88
         &LYP  T
         &END LYP
       &END XC_FUNCTIONAL
       &VDW_POTENTIAL
         POTENTIAL_TYPE  PAIR_POTENTIAL
         &PAIR_POTENTIAL
           R_CUTOFF     8.0000000000000000E+00
           TYPE  DFTD3
           PARAMETER_FILE_NAME ../dftd3.dat
           REFERENCE_FUNCTIONAL PBE
           EPS_CN     1.0000000000000000E-02
           CALCULATE_C9_TERM  T
           REFERENCE_C9_TERM  T
           LONG_RANGE_CORRECTION  T
         &END PAIR_POTENTIAL
       &END VDW_POTENTIAL
     &END XC
   &END DFT
   &SUBSYS
     &CELL
       A     3.1000000000000011E+01    0.0000000000000000E+00    0.0000000000000000E+00
       B     0.0000000000000000E+00    1.5640400000000005E+01    0.0000000000000000E+00
       C     0.0000000000000000E+00    0.0000000000000000E+00    1.5640400000000005E+01
       MULTIPLE_UNIT_CELL  1 1 1
     &END CELL
     &COORD
Na    1.3286318921035836E+01    1.3614063967463656E+01    1.1728050930092907E+01
Na    1.2523358969849829E+01   -7.3462122629921822E-01    9.7120169705560766E+00
O    2.0870269874930649E+00    4.0865703183420337E+00    5.8562334048014435E+00
H    2.0316447793438357E+00    5.0584745221132268E+00    5.9610023039145279E+00
H    1.3184285000575218E+00    3.8776053202627789E+00    5.3040976629339323E+00
O    3.1555919884652632E+00    9.2452722166802115E+00    1.4471916934492752E+01
H    3.7928078117053126E+00    9.9774533993926227E+00    1.4468959613505644E+01
H    3.4123636142611913E+00    8.6672215399732266E+00    1.3736009577898940E+01
     &END COORD
     &VELOCITY
          -4.4606192041125074E-05    2.2910283712135158E-04   -4.0036861008258982E-04
           7.3058239091108217E-05   -2.0125235933338208E-04    3.6332784105453752E-04
           3.8266565551863624E-05   -3.5874524380332236E-05   -1.0679085397068891E-04
          -6.3236824320307033E-04    4.0174318998758783E-05    1.3824215141977153E-04
          -1.4467395239910316E-04    2.0218266649262508E-04    7.9202921271559446E-04
          -2.2171434510392410E-05   -6.2950590932101455E-05    8.8168050258192519E-05
           5.2982772704762990E-05    1.3930419146095219E-04   -1.8036331754184572E-04
          -1.7331312353883934E-04    5.3845779124284576E-04    3.9591238206890749E-04
     &END VELOCITY
     &KIND H
       BASIS_SET DZVP-MOLOPT-SR-GTH
       POTENTIAL GTH-PBE-q1
       &BASIS
1
2 0 1 5 2 1
0.1006846822853300E+02 -0.3391744490000000E-01  0.5919377550000000E-01  0.9905134400000000E-02
0.2680222868089000E+01 -0.1222022121000000E+00  0.8433183289000000E+00  0.1224495665000000E+00
0.7915015391220001E+00 -0.4438188612000000E+00 -0.1155707115500000E+01  0.4771832409000000E+00
0.2391161504870000E+00 -0.4531821866000000E+00  0.4947962120000000E-01  0.5479196782000000E+00
0.8219318444100000E-01 -0.1316128615000000E+00  0.5227087380000000E+00  0.8690318540000000E+00
       &END BASIS
       &POTENTIAL
1
0.2000000000000000E+00 2 -0.4195961470000000E+01  0.7304982100000000E+00
0
       &END POTENTIAL
     &END KIND
     &KIND O
       BASIS_SET DZVP-MOLOPT-SR-GTH
       POTENTIAL GTH-PBE-q6
       &BASIS
1
2 0 2 5 2 2 1
0.1038922801831700E+02  0.1262407229000000E+00  0.6921579790000000E-01 -0.6130203720000000E-01 -0.2686270110000000E-01  0.2984522750000000E-01
0.3849621072005000E+01  0.1399337043000000E+00  0.1156345389000000E+00 -0.1900875117000000E+00 -0.6283021000000000E-02  0.6093973390000000E-01
0.1388401188741000E+01 -0.4343482317000000E+00 -0.3228397194000000E+00 -0.3777269828000000E+00 -0.2248391878000000E+00  0.7323215801000000E+00
0.4969550436550000E+00 -0.8527917909000000E+00 -0.9594401660000000E-01 -0.4542660860000000E+00  0.3803246586000000E+00  0.8935649184000000E+00
0.1624916150400000E+00 -0.2423515378000000E+00  0.1102830348700000E+01 -0.2573889830000000E+00  0.1054102919900000E+01  0.1529541887000000E+00
       &END BASIS
       &POTENTIAL
2 4
0.2434202600000000E+00 2 -0.1699189235000000E+02  0.2566142060000000E+01
2
0.2208314000000000E+00 1  0.1838885102000000E+02
0.2172007000000000E+00 0
       &END POTENTIAL
     &END KIND
     &KIND I
       BASIS_SET DZVP-MOLOPT-SR-GTH
       POTENTIAL GTH-PBE-q7
       &BASIS
1
2 0 2 5 2 2 1
0.9661726937760000E+00 -0.4724631893510000E+00  0.1555822203873000E+01 -0.4312534730020000E+00  0.4374991361440000E+00  0.7909099814790000E+00
0.8288855705270000E+00 -0.4617483861400000E-01 -0.4052453983040000E+00  0.4054481330980000E+00 -0.3608369749790000E+00 -0.7067391303230000E+00
0.3671593108060000E+00  0.6748660286690000E+00  0.8373462810420000E+00  0.1544082880420000E+00 -0.4269558193280000E+00 -0.1146102256372000E+01
0.2013691068320000E+00  0.4418461904320000E+00 -0.2170714561688000E+01  0.3071310887970000E+00 -0.1428790897200000E+00 -0.1473453298743000E+01
0.8301507112600000E-01  0.1477007514960000E+00  0.2099200395478000E+01  0.1514523567510000E+00  0.1946428231727000E+01 -0.5177497012720000E+00
       &END BASIS
       &POTENTIAL
2 5
0.5600000000000001E+00 1  0.1373638610000000E+02
3
0.5893900100000000E+00 3  0.2139348900000000E+00  0.8845652600000000E+00 -0.2067022000000000E-01
-0.1175588960000000E+01  0.5337028000000000E-01
-0.4236135000000000E-01
0.5423271700000000E+00 2  0.2872106600000000E+00  0.4693267100000000E+00
-0.5553148500000000E+00
0.7704050700000000E+00 1  0.3070961500000000E+00
       &END POTENTIAL
     &END KIND
     &KIND Li
       BASIS_SET DZVP-MOLOPT-SR-GTH
       POTENTIAL GTH-PBE-q3
     &END KIND
     &KIND Na
       BASIS_SET DZVP-MOLOPT-SR-GTH
       POTENTIAL GTH-PBE-q9
       &BASIS
1
2 0 1 7 3 2
0.2351880076196000E+02  0.3779826805300000E-01  0.5040470618000000E-02  0.3777907065700000E-01 -0.4123515085400000E-01 -0.5410838671000000E-02
0.1113565610327500E+02  0.1804152720160000E+00  0.3121004835600000E-01 -0.1196144293190000E+00 -0.1027040656580000E+00 -0.1760933831700000E-01
0.4647813820246000E+01 -0.8423548988500000E-01 -0.2121458488700000E-01  0.2243024957020000E+00 -0.2765071563740000E+00 -0.4380300865300000E-01
0.1866708259982000E+01 -0.5020072394680000E+00 -0.8800642668000000E-01 -0.1837798132120000E+00 -0.4050879856000000E+00 -0.6784423562300000E-01
0.7346836971960000E+00 -0.4874547129940000E+00 -0.2415626435800000E+00  0.1641649867502000E+01 -0.3456697625980000E+00 -0.8505797401200001E-01
0.2756729958600000E+00 -0.8890985577799999E-01  0.4606950361200000E-01 -0.2281564821968000E+01 -0.1282947247740000E+00  0.1595277707190000E+00
0.4989510824500000E-01 -0.2456248530000000E-03  0.1008694292400000E+01  0.8016609909810000E+00 -0.2074313963000000E-02  0.9821494245680000E+00
       &END BASIS
       &POTENTIAL
3 6
0.2339650200000000E+00 2 -0.2689483460000000E+01 -0.5094777000000000E+00
2
0.1497769000000000E+00 1  0.3285715860000000E+02
0.1231990100000000E+00 1 -0.1399900802000000E+02
       &END POTENTIAL
     &END KIND
     &TOPOLOGY
       NUMBER_OF_ATOMS  8
       MULTIPLE_UNIT_CELL  1 1 1
     &END TOPOLOGY
   &END SUBSYS
 &END FORCE_EVAL


With best regards,jia

On Tuesday, August 11, 2015 at 9:22:59 AM UTC+2, jgh wrote:Hi



there is a known issue with the BLYP functional on low cutoff grids

with high density ions. 

You could switch functional, increase (considerably) the cutoff,

use GAPW, use NLCC pseudopotentials, use smoothened density (see XC section).



BTW: your definition of the D3 vdW correction has some inconsistencies:



- you use PBE as reference functional (not BLYP?)

- you have a small system, long range correction should not be used

  ( this simulates a uniform system)



regards



Juerg Hutter

--------------------------------------------------------------

Juerg Hutter                         Phone : ++41 44 635 4491

Institut für Chemie C                FAX   : ++41 44 635 6838

Universität Zürich                   E-mail: hut... at chem.uzh.ch

Winterthurerstrasse 190

CH-8057 Zürich, Switzerland

---------------------------------------------------------------







-- 

You received this message because you are subscribed to the Google Groups "cp2k" group.

To unsubscribe from this group and stop receiving emails from it, send an email to cp2k+uns... at googlegroups.com.

To post to this group, send email to cp... at googlegroups.com.

Visit this group at http://groups.google.com/group/cp2k.

For more options, visit https://groups.google.com/d/optout.





More information about the CP2K-user mailing list